42040 - Moroso Transmission Pans

This part should fit your vehicle. It is a universal part.

Images May Not be Vehicle Specific. For Display Purposes Only.

Images Of This Specific Part Number

Non-Specific Images

Place Order Here

Part #: 42040
Notes: Transmission Pan
For Ford C4 Trans
Your Price: $203.32

Specs

Depth 3.080"

This Item Also Available In

Part Number Price Notes & Specs
41060 $8.56 Notes Transmission Tailshaft Plug
For Early Muncie, Borg-Warner, Ford, Chrysler, Chevrolet Powerglide
OD 1-1/2"
41200 $117.44 Notes Auto Trans Oil Cooler/Filter
41205 $222.10 Notes Trans Oil Cooler
Heavy-Duty
41220 $112.21 Notes Auto Trans Expansion Tank
42000 $211.45 Notes Transmission Pan
For Powerglide Trans
Depth 3.080"
42001 $187.08 Notes Transmission Pan
For Powerglide Trans
Depth 1.830"
42010 $254.86 Notes Transmission Pan
For Turbo350 Trans
Depth 3.000"
42020 $294.10 Notes Transmission Pan
For Turbo400 Trans
Depth 3.000"
42025 $211.36 Notes Transmission Pan
For GM 700R4 Trans
Depth 2.375"
42050 $311.12 Notes Transmission Pan
For Ford E40D/4R100 Trans
Depth 3.642"
42060 $254.08 Notes Transmission Pan
For Ford C6 Trans
Depth 2.000"
42080 $289.18 Notes Transmission Pan
For Torqueflite 727 Trans
Depth 2.330"
42090 $289.18 Notes Transmission Pan
For Chrysler A904 Trans
Depth 2.250"
93100 $30.60 Notes Transmission Pan Gasket
For Powerglide Transmission Pans
97290 $24.20 Notes Filter Cartridge
For 41200 Cooler
97291 $34.76 Notes Filter Cartridge
For 41205 Cooler
41201 $108.37 Notes Auto Trans Oil Cooler/Filter

All Fitments

UNIVERSAL
Year Model SubModel Cylinders Liter Aspiration Eng Desg. Fuel Notes
0 - 0 NON APPLICATION SPECIFIC ALL ALL ALL ALL ALL ALL

Product Description

TRANSMISSION PANS

  • Fully Fabricated, Aluminum Pans
  • One-piece Billet Rail
  • Reduce temperature and improve oil control
  • Dual fittings with magnetic drain plugs
  • Now includes serrated flange hex bolts (No. 42050 includes metric studs)

AUTOMATIC TRANSMISSION OIL COOLER/FILTER

  • Combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
  • Can be used on the street as an auxiliary cooler in conjunction with a stock cooler
  • Made of aluminum with 500 sq. inches of radiation surface for high heat transfer
  • Filter with magnet removes all wear particles over 5 microns in size
  • Dimensions: 3” diameter, 12” length, and weighs only 1 lb.
  • Very easy to install
  • Comes complete with filter cartridge, includes two 1/4” NPT to 3/8” line fittings and all necessary installation instructions

AUTOMATIC TRANSMISSION OIL COOLER/FILTER

  • Heavy Duty
  • More than double the surface area of our standard No. 41200 transmission cooler
  • Withstands up to 30 lbs. of pressure
  • Dual combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
  • Made of aluminum with 1072 sq. inches of radiation surface for high heat transfer
  • Filter with magnet removes all wear particles over 10 microns in size
  • Dimensions: 3-1/2” H x 6-1/4”W x 18” L and weighs 4.7 lbs.
  • Very easy to install, uses four mounting tabs; not recommended for street use
  • Comes complete with filter cartridge, includes two 1/4” NPT to -6AN fittings and all necessary installation instructions

AUTOMATIC TRANSMISSION EXPANSION TANK

  • Universal Fit
  • Prevents fluid mist from spraying on the race surface, behind your car (and tires)
  • Pressurized fluid is captured in the Expansion tank and will drain back into the transmission as it cools (if mounted as instructed)
  • Excess fluid may also be drained between rounds, by using the ball valve included
  • Includes tank mounting bracket
  • Meets IHRA Top Sportsman and Top Dragster requirement for One Pint Transmission Overflow Rule
  • Dimensions: 9-1/4” high x 2-1/4” wide

ROLLER PILOT BEARING

  • Unlike other roller pilot bearings, this high speed bearing is designed as a direct replacement in all Chevrolet V8’s and 90° V6’s (also fits 1976 and later V6 Buick)
  • Requires no modification to either crank or input shafts
  • Eliminates premature bearing failure and insures clean clutch release by maintaining true alignment of clutch disc to flywheel
  • Packed with high temperature grease for proper lubrication under extreme high heat conditions
  • Suitable for all high performance applications including drag, oval track/road race and street
  • 1.093” O.D. x .591” I.D. x .72” Depth
  • One per package

TRANSMISSION TAILSHAFT PLUG

  • Another time saver from Moroso
  • Eliminates the messy spilling of transmission fluid during transmission removal, replacement and storage
  • One per package

Product Reviews

Be the first to review this item.

Rating
Title
Review